FOXFIRE HD DEGREASER 

HD DEGREASER 

HD Degreaser is a water-based, alkaline solution of anionic oil-splitting surfactants used for heavy-duty cleaning, degreasing and grime removal. Foxfire HD Degreaser can be used on concrete, painted steel, steel, copper, aluminum, galvanized steel, bronze and plastic surfaces.

APPLICATION:

Shake well. Application temperature range 40-90ºF. Mechanically remove as much buildup as possible prior to application. If applying in high temperatures, or in direct sunlight, prewet the surface. Apply cleaner liberally with a low-pressure (25- 50 psi) chemical-resistant sprayer or a masonry washing brush. Let product work on surface for 5-10 minutes. Do NOT allow product or residue to dry on surface and rewet any areas that have started to dry. Using a stiff brush, scrub treated areas and thoroughly rinse with high-pressure water (1000-3000 psi, 4-5 gals per min, depending on surface). Repeat process as needed, making sure that all product is thoroughly rinsed from the surface. Cycle cleaning and rinsing may be necessary.

Building Maintenance: Remove paint oxidation and smoke from walls and ceiling.

Transportation: Remove brake dust, soot and paint oxidation from equipment, RV’s and trucks.

Boating: Remove oxidation and fouling from fiberglass, aluminum and paint.

Industrial: Remove heavy oils, greases, flux, waxes, cleaning and rubbing compounds, adhesives, dyes, paints.

COVERAGE: 50-300 sq. ft. per gallon, depending on surface texture, porosity and stain severity.


* Coverage rate is intended for estimating purposes only. Test patterns should be performed to determine best approach and estimated coverage ms and 5 gal (18.9 L) pails.

PACKAGING: 275-gal (1040 L) IBC Totes, 55-gal (208 L) drums and in 5 gal (18.9 L) pails. 275-gal (1040 L) IBC Totes, 55-gal (208 L) drums and in 5 gal (18.9 L) pails.

HD DEGREASER

HEAVY-DUTY ALKALINE CLEANER AND DEGREASER. REMOVES TIRE-MARKS, SMOKE/SOOT DEPOSITS AND GREASE/GRIME FROM CONCRETE, MASONRY, STONE, WOOD AND MORE.

● Removes grease, grime, oil, tar, tire marks and soot with minimum scrubbing.
● Contains no CFCs. Readily biodegradable in both water and soil, with accumulation not expected.
● Excellent detergency and oil coupling.
● Non-Flammable – Flash Point > 200° F.
● Low Odor. Non-hazardous.

Rubber Asphalt vs Polymer

Rubber Asphalt vs Polymer

SealFlex 6690

SealFlex 6690

Clay Stabilization

Clay Stabilization