10250 Grand Summit Blvd, Dripping Springs, Texas 78620
1-(800) 594-0837

Polymer Emulsions

EnviroTX > Polymer Emulsions

Hits: 86

ET_ProductImages_04_0002_Layer 2

Polymer Emulsions

TOP-SEAL WHITE Liquid Soil/Base Stabilizer and Dust Suppressant

TOP-SEAL WHITE is an environmentally safe, all-purpose liquid soil additive that is mixed with water and used for controlling and managing various soil conditions in many countries around the world. When properly applied, Top-Seal White prevents base failure, dust pollution, soil erosion, and water loss from ponds and reservoirs. TSW is also used as a pit liner, landfill cap, etc.


TSW is the primary (and most successful) product we ship into the Eagle Ford Shale and Permian Basin oilfields, capable of converting local pit run caliche into “like pavement” – without paving.

TSW is available in white and black (black for an asphalt like pavement appearance).


There are generally two options for using TSW for road work:

Using Top-Seal White in the oilfield will pay for next year’s drilling costs – in a matter of weeks. It will keep your customers out of the dust during dry weather and out of the mud during wet weather and replaces Portland Cement and Lime for in-depth stabilization. If used as a pit liner instead of poly, it will save at least 50%, and a minimum of 50% performing solids in the concentrate is guaranteed. Top-Seal White exceeds the EPA Particulate Matter (PM10) and EPA permeability standards as per ASTM D5084.

• Over 20 years of successful performance
• Very environmentally safe and user friendly
• Opens up to traffic immediately
• Simply dilute in water truck and apply


Over 500% greater dry-film strength, and for a fraction of the permeability of nearest competitor. The surface penetration as good as, or betteer, than MC-30, with costs similar to MC-30, 30% to 50% of RC-250 covered prime cost.

Terra Prime – TX DOT Approved

Primer and Sealant to replace MC-30 as a “Topical Prime”, and replace RC-250 as a covered or inverted primer. Get back on your “primed” working platform within minutes. Open to traffic and pave over within the hour.

• Over 500% greater dry-film strength than nearest competitor
• A fraction of the permeability of nearest competitor
• Surface penetration as good as, or betteer, than MC-30
• Cost is similar to MC-30, 30% to 50% of RC-250 covered prime cost