EnviRoad Gard™ DC (CBSMS-1S)

Overview



Purpose To Bond and Waterproof and Suppress Dust.

Introduction EnviRoad Gard™ DC is a cationic modified petroleum resin and asphalt emulsion to be used as a Dust Control that is mixed with water then applied to the road.

Dilution Ratio EnviRoad Gard™ DC is delivered in a liquid emulsion concentrate which is diluted with COLD or WARM potable or non-potable water.

Application Rates .25 to .50 diluted gallons per sq. yard.

Procedure

Day 1: Initial Treatment
Apply at .50 gal. per sq. yd.
Let cure for 4-24 hours.

Day 7: Second Application
Apply at .50 gal. per sq. yd.
Let cure for 4-24 hours.

Day 21: Third Application
Apply at .25 gal. per sq. yd.
Let cure for 4-24 hours.

Follow-Up Application
Apply at .25 gal. per sq. yd.
Frequency contingent on traffic.

Cost Labor cost and time are greatly reduced when using EnviRoad Gard™